Whey do I need layers anyway

Whey do I need layers anyway

Postby kristan w » Fri Feb 14, 2014 12:13 am

I did a small house plans and elevations, I did not use the layers at all. Whey do I need to use this function anyway?
kristan w

Re: Whey do I need layers anyway

Postby John B » Sat Mar 29, 2014 11:03 pm

The use of layer becomes practical for complex projects where a lot of elements are placed in the drawing. For example, different kind of furniture and equipment, walls, electrical outlets, plumbing, text, dimensions and other symbols. When you place these object into their own layer, it makes convenient for editing later on. If you are to work in a professional office, following layer standard names is expected.
John B

Re: Whey do I need layers anyway

Postby Jenna S. » Thu Nov 27, 2014 2:37 am

Tips from CADD Primer:

Creating Layers for an Engineer’s Office

Fig. 6.1 illustrates how you can organize an engineer’s office diagram in several layers. You can place walls and partitions on one layer, furniture and equipment on another, and so on for text, symbols, and construction lines, etc. You can also create a separate layer to show the ceiling and lighting plan, floor finish plan, or any other drawing objects that you want to include in the drawing.

Fig. 6.2 shows how you can display a furniture plan and a reflected ceiling plan from this multi-layered drawing. When you need to display the furniture layout as shown in illustration A, you can turn on the wall and furniture layers, and turn off the rest. When you need to display the ceiling and lighting plan (Diagram B), you can turn on only the ceiling and the wall layers. You can turn the relevant text and symbol layers on and off as required.


Layers are given specific characteristics that distinguish them from each other. Each layer has a specific color and line type. Whatever you draw on a layer is drawn with that color and line type. This color coding helps to identify which drawing objects are placed on which layer.
The Tools to Work with Layers
CADD provides a number of tools that allow you to work efficiently with layers. Most programs use a layer control window that allows you to manage all aspects of working with layers.

The following are the basic tools for working with layers:

• Creating new layers
• Setting a layer to current
• Changing color and line type of layers
• Turning layers on or off
• Locking and unlocking layers
Creating New Layers
CADD allows you to create a number of layers in a drawing. To create a new layer you need to enter the name of the layer and assign a color and line type to it. The layer name should reflect the kind of information it contains.

Most companies follow standard guidelines in naming layers and placing specific information on specific layers. This allows CADD users to efficiently coordinate information. Professional institutes such as the American Institute of Architects (AIA) and the American Institute of Engineers (AIE) have developed standard naming conventions for layers that are commonly used by CADD professionals.

The following are some examples of layer names developed by the American Institute of Architects (AIA):

Layer name Description
A-CLNG-GRID Ceiling grid
A-WALL-EXTR Exterior full height walls
E-LITE-CLNG Ceiling-mounted light fixtures
E-LITE-CIRC Lighting circuits
G-ANNO-NOTE General notes and general remarks
G-ANNO-TTLB Border and title block line work
I-FURN-SEAT Chairs, sofas, etc.

AIA layers constitute hundreds of names that accommodate all disciplines of the building trade. The first letter of the layer name identifies a building trade. For example, A for architectural, E for electrical, I for interior design, S for structural, L for landscape and G for general drawings. There are dozens of layer names established for each engineering discipline.

For more information, visit the web site of the American Institute of Architects at

Facility Information Council (FIC) of the National Institute of Building Sciences (NIBS) has taken the initiative to develop universal CADD standards including layer names. For information visit their web site at:

Setting a Layer to Current:
When you need to work on a specific layer, you must set that layer to be current by selecting it in the layer control window (Fig. 6.3). When a layer is set current, whatever you draw is drawn on that layer. The current layer name or number is displayed in the status bar.

Let’s say you want to add some new furniture to the diagram as shown in Fig. 6.2. In order to maintain consistency, the new furniture must be drawn on the same layer as the existing furniture. You can set the furniture layer as the current layer. Subsequently, all the drawing work will be drawn on the furniture layer and should appear in the same color as the other furniture. If the color or line type is different, you may be working on the wrong layer.

Changing Color and Line Type of Layers:

You can change the color and line type of layers as required. When you change the color and line type of layers, all the drawing objects on that layer are displayed with the new color and line type. You can make adjustments to colors and line types by selecting the layer from the layer control window (Fig. 6.3, 6.4) and choosing a color and line type for the layer.

Note: The colors used in a CADD drawing represent certain line weights and pen numbers when the drawings are plotted. More on colors and line weights is discussed in Chapter 8, "Printing and Plotting."

Turning Layers On or Off:

You can turn any number of layers on or off by selecting them from the layer control window. To turn on a layer, highlight it in the layer control window and press the ON button (Fig. 6.3, 6.4). Similarly, you can turn the layers off when needed.

Turning layers on and off provides a great convenience for drawing and editing, as well as for plotting. To plot selected layers, simply turn off the rest of the layers. When drawing and editing, it is also a good idea to turn off unwanted layers, particularly when there is a lot of information on the screen. This speeds up the display process.

Locking and Unlocking Layers:

Most CADD programs allow you to assign a lock or unlock status to layers. If a layer is locked, it means that you can't erase, move, or copy anything on that layer. To erase any drawing object from that layer, you must first unlock it. If there are certain drawing objects that are of a permanent nature and you don't want to run the risk of accidentally erasing or moving them, you can lock that layer.

Are Layers Absolutely Necessary?:

Layers are not absolutely necessary, however they provide a convenient way to manage information in CADD drawings. For example, in the engineer’s office example, without the help of this function you may have to create separate drawings to show the furniture plan, lighting plan, etc. With the help of layers, you can create just one composite drawing. The composite drawing can contain all the plans. It makes it easier to correlate information from one plan to another.

For complex drawings, layers are a must because they make editing much easier. Often you need to select only specific drawing objects for editing, and the use of layers makes its very easy to select them.

Important Tips:

• When working on an existing drawing, you must first examine how many layers exist in the drawing and which layer contains what information. If you start working on a drawing that has certain layers turned off, you may not be aware of the hidden data.

• When layers are turned off, the drawing objects on those layers are not affected by the use of any edit function. Be careful when using move or copy functions when some layers are turned off. You may copy over or move a drawing that is turned off. Later on, When you turn all the layers on, drawing objects may be overlapped or unaligned.

• Most CADD programs allow you to create customized macros that can make working with layers a snap. You can write a macro that can instantly turn on or off a combination of layers. For example, you can write a macro named FP (Furniture Plan) that automatically displays the layers required for a furniture plan. Thereafter, when you enter the word FP on the keyboard, it will automatically display the furniture plan. You can create dozens of macros to display specific diagrams.
Jenna S.

Return to AutoCAD working with layers

Who is online

Users browsing this forum: No registered users and 1 guest